ALGE-Timing Devices

The following devices are supported:

• ALGE-Timy in most programs, e.g. Backup or PC-Timer

• TDC 8000/8001 by selecting ´ALGE-Timing Timy (Backup)´ as timing device

FDS devices can also work with the ALGE-Timing protocol.

Configuration

ALGE-Timing channels range from C0 to C9, usually being C0 the start and C1 the finish. The meaning of each setting is described here.

Key	Values	Default
Start Channels	C0-C9	C0
Recording Channels	C0-C9	C1
Bib Channels	C0-C9	C1
Use Rising/Falling Edge	true/false	false

Rising/falling edge should be enabled (checked) when expecting longer finish passings close to each other. This way the recording only stops on the last release of the light beam.